หมวดหมู่สินค้า: LOAD CELLS
Single point load cell. Nickel-plated steel alloy.
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp
04 มิถุนายน 2567
ผู้ชม 971 ผู้ชม
Double bending beam load cell with Beryllium-Copper measuring element. Viscous damping specially for use in dynamic weighing applications. Stainless-steel housing. Protected against humidity IP 65 (DIN 40050). Single point load cell, for off-center loads. Integrated on-center overload protection. 6 wire (sense) electrical connection.
- Double bending beam load cell with Beryllium-Copper measuring element :
- Outstanding linearity and hysteresis
- High resistance at fatigue and shock
- Viscous damping specially for use in dynamic weighing applications:
- Faster setting time
- Higher weighing speeds
- Increase load cell life
- Stainless-steel housing
- Protected against humidity IP 65 (DIN 40050)
- Single point load cell, for off-center loads
- Integrated on-center overload protection
- 6 wire (sense) electrical connection
Technical specification
| Nominal capacities | 2-3-5-7.5-10-15-20-30 | kg |
|---|---|---|
| Accuracy class | 0.05 | % |
| Minimum dead load | 0 | %Ln |
| Service load | 150 | %Ln |
| Safe load limit | 200 | %Ln |
| Total error | < ± 0.05 | %Sn |
| Repeatability error | < ± 0.015 | %Sn |
| Temperature effect on zero | < ± 0.04 | %Sn/5K |
| Temperature effect on sensitivity | < ± 0.02 | %Sn/5K |
| Creep error (30 minutes) | < ± 0.035 | %Sn/5K |
| Temperature compensation | -10 až +40 | ° C |
| Temperature limits | -20 až +50 | ° C |
| Nominal sensitivity (Sn) | 2 ± 10% | mV/V |
| Nominal input voltage | 10 | V |
| Max. input voltage | 15 | V |
| Input impedance | 400 ± 20 | Ohm |
| Output impedance | 350 ± 3 | Ohm |
| Počáteční hodnota nuly | < ± 2 | %Sn |
| Insulation resistance | > 5000 | MOhm |
| Max.deflection (at Ln) | 0.2 - 0.4 | mm |
Product Brochure
