เครื่องทดสอบแรงดึง แบบใช้มอเตอร์ (Motorized Force Testers) ยี่ห้อ Mark-10 รุ่น Series F105-F505H

เครื่องทดสอบแรงดึง แบบใช้มอเตอร์ (Motorized Force Testers) ยี่ห้อ Mark-10 รุ่น Series F105-F505H

หมวดหมู่สินค้า: Motorized Force Testers

*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp

แท็ก:

20 มีนาคม 2566

ผู้ชม 479 ผู้ชม

Series F - Advanced Force Testers

Series F test frames are designed for tension and compression force testing applications up to 1,500 lbF (6.7 kN).

Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is available as an integrated tablet control panel or standalone license for any Windows device.

Advanced Test Frames F105 / F305 / F505 / F505H

This family of force testers is designed for tension and compression force testing applications, with force capacities up to 500 lbF (2.2 kN). Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.

Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.

Rigid and precise by design
Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position. Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.

Conveniently modular
Frame bases can be removed to accommodate column extensions and alternative mounting configurations. Most electronics are housed in a self-contained enclosure, easily accessed and replaced if needed. Integrated T-slots along the column accommodate add-ons.

External limit switches
Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.

Seamless force sensor interface

Series FS05 smart force sensors mount directly to the crosshead of models F105, F305, F505, and F505H, without any connection cables. Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN]. Accurate to ±0.1% of full scale.

Series R07 S-beam type force sensors accommodate higher force ranges, also compatible with Plug & Test® technology. Ranges available from 50 to 1,500 lbF [250 N to 7.5 kN]. Accurate to ±0.15% of full scale.

Easy-to-service electronics
Most electronics are housed in an integrated module, easily replaced without special tools or processes.

IntelliMESUR^® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR^®, you can create and run a wide range of basic and multi-step tests, including:
● Limit testing to a load, break, or distance
● Height measurement
● Load holding
● Cycle testing
● Multi-step testing, utilizing any combination of the above functions
Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.

Ready. Set. Go.
From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification.

What's your point of view?

Run a test via the Graph or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples. Individual runs may be invalidated if, for example, the sample slips out of the grips, or the test was interrupted.

Results View



The Results view displays user-selected results for each run. Statistics may be applied to selected results.

Graph View



The Graph view plots force vs. distance or force vs. time. Overlay up to 10 runs for visual comparisons.

F105

F305

F505

F505H

Load capacity*:

100 lbF
[0.5 kN]

300 lbF
[1.3 kN]

500 lbF[2.2 kN]

Maximum travel:

18.0 in
[457 mm]

Speed range:

0.02 - 45 in/min
[0.5 - 1,100 mm/min]

Load accuracy
(% of full scale)

● Test frame: ±0.1%
● Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%

Load sampling rate:

20,000 Hz

Data acquisition rate:

1,000 Hz

Speed accuracy:

±0.2% of setting, virtually no variation with load

Distance accuracy:

±0.002 in [0.05 mm], factory-compensated at up to full load

Distance resolution:

0.0005 in [0.01 mm]

Limit switch repeatability:

±0.001 in [0.03 mm]

Power:

Universal input 100-240 VAC, 50/60 Hz, 120W

Fuse type:

1.2 A, 250V, 3AG, SLO BLO

Weight (test frame only):

60 lb
[27 kg]

70 lb
[32 kg]

Shipping weight:

75 lb
[34 kg]

85 lb
[39 kg]

Environmental conditions:

● Indoor use only
● Up to 6,500 ft [2,000 m] above sea level
● Temperature range: 40 - 95°F [5 - 35°C]
● Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
● Mains supply voltage fluctuations up to ±10 % of the nominal voltage
● Transient overvoltages up to the levels of Overvoltage Category II
● Use in environments up to Pollution Degree 2

Conformance:

Warranty:

3 years [see individual statement for further details]

* Load capacity is reduced at higher speeds, as follows:
- F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
- F505 / F505H: limited to 300 lbF [1.3 kN] above 24 in [610 mm]/min

Model No.

HS Code

ECCN

Country of Origin

F105-IMT, -IM
F305-IMT, -IM
F505-IMT, -IM
F505H-IMT, -IM
AC1094-1,-2, -3
AC1095-1,-2, -3
AC1093

9024900000

EAR99

USA

AC1085
AC1092-1,-2
CERT-DS

9024800000



The F105-IMT, F305-IMT, F505-IMT, and F505H-IMT advanced test frames are shipped as shown at left, and includes the following accessories:

(1) Control panel, mounting bracket, and hardware
(1) Mounting bracket, column end (F505H only)
(1) USB cable
(1) #10-32M medium hook
(1) 5/16-18M large hook
(1) #10-32F 2” diameter compression plate
(1) #10-32 M/F 2” extension rod
(1) #10-32 F/F coupler
(1) Adapter, 5/16-18M to #10-32F
(1) Set screw, #10-32 x 3/4”
(2) Hex nut, #10-32
(1) Power cord
(1) Allen wrench set
(1) NIST-traceable certificate of calibration, force



The F105-IM, F305-IM, F505-IM, and F505H-IM advanced test frames are shipped as shown at left, and includes the following accessories:

(1) Mounting bracket, column end (F505H only)
(1) USB flash drive containing software installation files
(1) USB dongle
(1) USB cable
(1) #10-32M medium hook
(1) 5/16-18M large hook
(1) #10-32F 2” diameter compression plate
(1) #10-32 M/F 2” extension rod
(1) #10-32 F/F coupler
(1) Adapter, 5/16-18M to #10-32F
(1) Set screw, #10-32 x 3/4”
(2) Hex nut, #10-32
(1) Power cord
(1) Allen wrench set
(1) NIST-traceable certificate of calibration, force

	Certificate of Calibration, Distance and Speed (CERT-DS) NIST-traceable certificate of calibration includes 10 data points for distance and speed.
	Series FS05 force sensors Measure tension and compression forces. Mount directly to the test frame’s crosshead without any cables. Capacities from 0.12 to 500 lbF [0.5 to 2,500 N].
	Series FS06 force sensors Measure tension and compression forces. Rugged s-beam design accommodates bulkier grips and fixtures. Capacities from 50 to 500 lbF [250 to 2,500 N].
	Control panel tabletop mounting kit (AC1085) For applications requiring remote use of the control panel. Features an adjustable viewing angle and a base with thru holes for bench mounting.
	Shield (AC1092-2) Provides pinch and sample debris protection for the operator. Includes an electrical interlock, preventing operation while the door is open.
	Single column extensions (AC1094-1 / -2 / -3) Increase the vertical clearance for longer samples (travel distance remains the same). Select from 6, 12 and 24 in [150, 300, and 600 mm] heights. Multiple extensions may be stacked in line. If a shield is required, consider Model AC1092-4. Extensions may be factory-installed at time of test frame order or field-installed1. Notes: 1.Except Model F505H. Factory installation required. 2.Factory deflection compensation applies to the test frame only. To further compensate for column extension deflection, run the Deflection Compensation utility in IntelliMESUR®.
Read more.

F105 / F305 / F505
IN [MM]



F05H
IN [MM]



 Brochure	 User's Guide
 Quick Start Guide	 Series F Firmware V1.00.09
 Solid Models - F105 / F305 / F505 - IM	 Solid Models - F105 / F305 / F505 - IMT
 Solid Models - F505H-IM	 Solid Models - F505H-IMT
 CE – Series F Motorized Force Testers	 UKCA – Series F Motorized Force Testers

ขอใบเสนอราคา

Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท)
อยู่ในระหว่างอัพเดทข้อมูล...

เวลาทำการ: จันทร์-ศุกร์ เวลา 09:00-17:30 น.

line oa company

เครื่องมือทดสอบยางและพลาสติก

Line OA Contact

line oa company

หมวดหมู่สินค้า

แบรนด์สินค้า

บทความ / หน่วยงานที่เกี่ยวข้อง

หน่วยงานภายนอก

เครื่องทดสอบแรงดึง แบบใช้มอเตอร์ (Motorized Force Testers) ยี่ห้อ Mark-10 รุ่น Series F105-F505H

*กรุณาส่งชื่อสินค้า หรือ URL ให้เราด้วย