เครื่องทดสอบแรงดึง แบบใช้มอเตอร์ (Motorized Force Testers) ยี่ห้อ Mark-10 รุ่น Series ESM750-ESM1500S

เครื่องทดสอบแรงดึง แบบใช้มอเตอร์ (Motorized Force Testers) ยี่ห้อ Mark-10 รุ่น Series ESM750-ESM1500S

หมวดหมู่สินค้า: Motorized Force Testers

*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp

แท็ก:

20 มีนาคม 2566

ผู้ชม 929 ผู้ชม

Series ESM Motorized Force Testers

Mark-10 offers a wide and unique range of motorized force measurement test stands. Motorized stands offer a significant advantage over manual test stands by providing constant test speed. Some models can be programmed for advanced test sequences to accommodate demanding applications. A test stand is an integral part of a testing system, typically also comprising a force gauge or torque gauge, grips, software, and accessories.

 Test Stand Comparison Chart

 Series F / Series ESM Comparison Chart

Motorized Tension / Compression Test Stands ESM750 - ESM1500S

ESM1500 and ESM750 single-column force testers are highly configurable solutions for tension and compression measurement applications, with capacities of 1,500 lbF (6.7 kN) and 750 lbF (3.4 kN), respectively. With generous travel and clearance, they are suitable for break testing, cycling, limit testing to a load or distance, loadholding, elongation testing, tensile testing, compression testing, and more.

Satisfy various test methods through an intuitive menu with selectable test parameters, such as speed, number of cycles, etc. Up to 50 profiles may be saved and password protected. Crosshead positioning for sample setup is a breeze with available FollowMe^®. Using your hand as your guide, push and pull on the load to move the crosshead at a dynamically variable speed.

The stands feature a unique modular controller function platform. Functions such as travel measurement, cycling, etc. are offered individually, accommodating a wide range of budgets and applications.

Collect force and travel data, plot and analyze results, and control test stand motion via MESUR®gauge Plus software. Or, fully control the stand by a PC through a custom application.

● Broad force range and clearance dimensions
● Compatible with load cells and force gauges
● USB output of force vs. time or force vs. distance
● Adjustable, removable control panel with intuitive menu navigation
● Unique modular function platform - select functions as required for the application
● Password protection of test parameters
● Stepper motor-driven, producing smooth and quiet operation with no speed variation under load
● Compact footprint, suitable for crowded workbenches
● Most electronics are housed in an integrated removeable enclosure, easily accessed for service



All test stands are supplied with the following accessories:

(1) AC1047-2 eye end kit
(2) G1088 spanner wrench
(1) Load cell / indicator mounting kit (-LC models)
(1) Force gauge mounting kit (-FG models)
(1) USB cable
(1) Interface cable, gauge/indicator to test stand
(4) Thumb screw for indicator / force gauge
(1) Allen wrench set
(1) Control panel
(1) Control panel mounting bracket with hardware
(1) Power cord
Shown at left: Model ESM1500LC

ESM1500

ESM1500S

ESM750

ESM750S

Load capacity:

1,500 lbF [6.7 kN] at < 60 in [1,525 mm]/min
1,000 lbF [4.5 kN] at > 60 in [1,525 mm]/min

750 lbF [3.4 kN] at < 35 in [900 mm]/min
500 lbF [2.3 kN] at > 35 in [900 mm]/min

Maximum travel distance:

32.0 in [813 mm]

14.2 in [360 mm]

32.0 in [813 mm]

14.2 in [360 mm]

Standard speed range:

0.5 - 24 in/min [10 - 600 mm/min]

Available speed range:

0.001 - 90 in/min [0.02 - 2,300 mm/min]

0.001 - 60 in/min [0.02 - 1,525 mm/min]

Speed setting accuracy:

±0.2% of setting

Speed variation with load:

±0% [stepper motor driven]

Travel accuracy*:

±0.002 in. per 10 in. [±0.05 mm per 250 mm]

Travel resolution:

0.001 in [0.02 mm]

Limit switch repeatability:

±0.001 in [0.03 mm]

Power:

Universal input 80-240 VAC,
50/60 Hz, 450W

Universal input 80-240 VAC,
50/60 Hz, 120 W

Weight:

198 lb [90 kg]

160 lb [72 kg]

185 lb [84 kg]

150 lb [68 kg]

Shipping weight:

248 lb [113 kg]

206 lb [93 kg]

236 lb [107 kg]

196 lb [88 kg]

Warranty:

3 years [see individual statement for further details]

Conformance:

CE mark

* Because load cell deflection and system deflection are present and not automatically compensated for, this equipment is recommended for applications requiring at least 0.2 in [5 mm] of travel distance.

Model No.	HS Code	ECCN	Country of Origin
ESM1500 ESM1500S ESM750 ESM750S AC1092-1,-2 All controller options	9024900000	EAR99	USA
AC1074 AC1085 ESM303-004 AC1055 AC1054 AC1057 AC1056 AC1065	9024800000	EAR99	USA

Feature	Part No.	Description	Requirements
FollowMe^® force-based positioning	SF008	Position the crosshead by manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.	● Series 7 or 5 gauge or indicator
Travel indication	SF009 (ESM1500 / ESM750)	Position is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated.	● For data output to a PC, a Series 7 or 5 gauge or indicator is required.
Travel indication	SF009-1 (ESM1500S / ESM750S)
Computer control	SF010	Fully control the stand and force gauge / indicator via custom-written application in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10). This option is not required for MESUR®gauge Plus software.	● Series 7 or 5 gauge or indicator ● SF009 travel indication ● For full speed range, consider SF017 and SF018 speed range extensions
Programmable travel limits	SF011	The stand stops at or cycles between programmable upper and lower travel distances.	● SF009 travel indication option
Overload protection	SF012	Protects a force gauge or force sensor against overload. Also compatible with many competitors’ gauges.	● Series 7 or 5 gauge or indicator
Auto return	SF013	The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit.	● Reversing at force set point: Series 7 or 5 gauge or indicator ● Reversing at travel limit: SF011 programmable travel limits option ● Reversing at break: SF019 break detection option
Cycling / dwell time	SF014	Same as auto-return, but programmable up to 99,999 cycles. Programmable dwell time at upper and lower limits up to 9,999 seconds.	● Same as auto-return, at the same speed in each direction. Add SF016 for independent up and down speeds.
Independent Up and Down speeds	SF016	Individually specify speeds for the up and down directions.	-
Low speed extension	SF017	Extends the standard speed range down to 0.001 in/min (0.02 mm/min).	-
High speed extension	SF018	ESM1500 / ESM1500S: Extends max speed to 90 in/min (2,300 mm/min).	-
High speed extension	SF018-1	ESM750 / ESM750S: Extends max speed to 60 in/min (1,525 mm/min).	-
Break detection	SF019	Crosshead stops at a programmable drop in force.	● Series 7 or 5 gauge or indicator
Loadholding	SF020	Dynamically adjusts the crosshead position to maintain a specified load for an indefinite or specified period of time.	● Series 7 or 5 gauge or indicator ● If a specified time is required, order SF014 cycling / dwell time option
Preload / sample touch	SF021	Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, spring, elongation, and other applications.	● SF009 travel indication ● Series 7 or 5 gauge or indicator
Profiles	SF022	Save and recall sets of test parameters, such as speeds, travel limits, preload, etc. Maximum of 50 profiles may be stored.	-
Complete options package	SFCOMP (ESM1500 / ESM750)	Includes all functions listed above. Requires a Series 7 or 5 gauge or indicator.
Complete options package	SFCOMP-1 (ESM1500S / ESM750S)

	Indicators and Force Gauges Select from Model M7I or M5I indicators for -LC test stands, or Series 7 or Series 5 force gauges for -FG test stands. Note: At 500 lbF (2,500 N) or more, force gauges are not recommended for applications involving sudden, sharp breaks. Examples include compression of brittle materials, pull testing of welds, etc. Consider an -LC test stand with indicator and load cell.
	Series R01 force sensors S-beam load cells for use with any Mark-10 indicator. Capacities from 50 to 2,000 lbF (250 N to 10 kN).
	Series R03 force sensors Inline force sensors for use with any Mark-10 indicator. Capacities available from 0.25 to 100 lbF (1 to 500 N).
Read more..

LC Models
For use with an indicator and sensor.



Model	A	B
ESM1500LC	51.35 [1304.3]	8.13 - 40.13 [206.4 - 1019.2]
ESM1500SLC	33.89 [860.9]	8.13 - 22.33 [206.4 - 567.1]
ESM750LC	50.85 [1291.6]	8.13 - 40.13 [206.4 - 1019.2]
ESM750SLC	33.39 [848.1]	8.13 - 22.33 [206.4 - 567.1]

FG Models
For use with a force gauge. For applications involving a sudden, sharp break, we recommend force gauge capacities up to 500 lbF (2,500 N) only. Otherwise, consider an -LC test stand instead.



Model	A	B
ESM1500FG	51.35 [1304.3]	5.25 - 37.25 [133.4 - 946.2]
ESM1500SFG	33.89 [860.9]	5.25 - 19.45 [133.4 - 494.0]
ESM750FG	50.85 [1291.6]	5.25 - 37.25 [133.4 - 946.2]
ESM750SFG	33.39 [848.1]	5.25 - 19.45 [133.4 - 494.0]

 Data Sheet	 User's Guide
 Solid Models - ESM750SFG	 Solid Models - ESM750SLC
 Solid Models - ESM750FG	 Solid Models - ESM750LC
 Solid Models - ESM1500SFG	 Solid Models - ESM1500SLC
 Solid Models - ESM1500FG	 Solid Models - ESM1500LC
 C# Code Example	 LabVIEW Serial Write / Read VI
 CE – ESM1500 & ESM750 Motorized Force Testers	 UKCA – ESM1500 & ESM750 Motorized Force Testers

ขอใบเสนอราคา

Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท)
อยู่ในระหว่างอัพเดทข้อมูล...

เวลาทำการ: จันทร์-ศุกร์ เวลา 09:00-17:30 น.

เครื่องมือทดสอบยางและพลาสติก

Line OA Contact

เว็ปไซด์ Siam

ไลเดียวครบจบทีเดียว

หมวดหมู่สินค้า

แบรนด์สินค้า

บทความ / หน่วยงานที่เกี่ยวข้อง

หน่วยงานภายนอก

เครื่องทดสอบแรงดึง แบบใช้มอเตอร์ (Motorized Force Testers) ยี่ห้อ Mark-10 รุ่น Series ESM750-ESM1500S

*กรุณาส่งชื่อสินค้า หรือ URL ให้เราด้วย