เวลาทำการ: จันทร์-ศุกร์ เวลา 09:00-17:30 น.

!!   รู้ลึก  รู้จริง เรื่องเครื่องมือทดสอบวัสดุ  !  ยืน 1 เรื่องมาตรฐานการให้บริการ   

ภาษา :

สนใจสินค้าและบริการ โปรดติดต่อ Line : @siamintercorp

เครื่องขัดหยาบ ขัดมัน ขัดละเอียด กึ่งอัตโนมัติ แบบจานเดี่ยว (Individual Pressure Semi-automatic Polishing Machine) ยี่ห้อ Lam Plan รุ่น SMARTLAM®3.0
หมวดหมู่สินค้า: Prepolishing & Polishing Machines
เครื่องขัดหยาบ ขัดมัน ขัดละเอียด กึ่งอัตโนมัติ แบบจานเดี่ยว (Individual Pressure Semi-automatic Polishing Machine)
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp

04 ธันวาคม 2566

ผู้ชม 472 ผู้ชม

SMARTLAM®3.0

With the SMARTLAM®3.0, LAM PLAN proposes an economic solution in terms of automatic pre-polishing and polishing of metallographic samples.

The SMARTLAM®3.0 is equipped with a new specific motorised head, composed with a 3 cells sample-holder and an individual pneumatic pressure system.

The moto reducer group has a high torque, the speed and the rotation can be set. The individual pneumatic pressure system handled by the electronic proportional valve, assures a great polishing regularity. The pressure applied per sample goes from 5 to 60 N.

The SMARTLAM®3.0 uses the reliable and proven base of the SMARTLAM®2.0 from which it conserves all the assets for a manual use (activation/deactivation of the sample holder head with the touch screen). The plate’s speed and rotation can be set from 20 tp 650 rpm.

The automatic motorised head compactness is due to its strategically placed power supply on the side of the machine. The head rotates to free the workspace and allows the easy change of the polishing support and the cleaning of the plate and bowl.​
Name

Technical data AMARTLAM®3.0

Plate Capacity Ø 200 to 300 mm
Body Steel, coated with epoxy paint
Bowl Removable resin basin for easy cleaning
Control 3,5“ touch screen to control the machine: start/stop, timer, speed and direction of plate, water solenoid valve
Plate rotation speed Variable from 20 to 650 rpm
Rotation Clockwise / counter-clockwise
Programming Loads 9 programs
Connection Slave connector for dosing unit
Water inlet Removable pipe with flow-rate adjustment and safety solenoid valve
Power max 0,75 kW
Voltage 230 V - 50 Hz single phase
Pneumatic feed 6 bars, filtered 50 µm
Dimension (WxHxD)

580 x 570 x 670 mm

Weight 65 kg
Reference 60 SL220 00

Technical characteristics and equipment

Built-in display and dosing unit

All the functions accomplished by the machine or the head are controlled by the screen. The programs can be stored in the intern memory.

For more efficiency, you can connect the M.M. 909 M automatic dosing unit to your SMARTLAM® 3.0 and benefit of a very economic and competitive set.

Downloads

 Technical sheet

 Metallography (EN)

Option: the automatic motorised head

The automatic motorised head compactness is due to its strategically placed power supply on the side of the machine. The head rotates to free the workspace and allows the easy change of the polishing support and the cleaning of the plate and bowl.
Capacity 3 samples Ø 25,4 to 50 mm (on Ø 200 mm plate 3 samples Ø 30 mm max.)
Body Steel coated with epoxy paint
Control Colour touch screen (3“): controls the machine and the head
Sample holder rotation speed Variable from 10 to 150 rpm
Rotation Clockwise / counter-clockwise
Pressure Individual, pneumatic, variable from 5 to 60 N
Programming Loads 9 programs
Power max Moto reducer with high torque
Positioning Manual, with indexable handle
Positioning and locking in height Manual, raising/lowering of the head with a lever, locking with knobe

 

Engine by shopup.com