เวลาทำการ: จันทร์-ศุกร์ เวลา 09:00-17:30 น.

!!   รู้ลึก  รู้จริง เรื่องเครื่องมือทดสอบวัสดุ  !  ยืน 1 เรื่องมาตรฐานการให้บริการ   

ภาษา :

สนใจสินค้าและบริการ โปรดติดต่อ Line : @siamintercorp

เครื่องตัดละเอียดสำหรับห้องปฏิบัติการ (High Precision Automatic 2 axis Cutting Machine) ยี่ห้อ Lam Plan รุ่น CUTLAM micro®3.0 (SIT188)
หมวดหมู่สินค้า: Cutting Machines
เครื่องตัดละเอียดสำหรับห้องปฏิบัติการโลหะวิทยา (High Precision Automatic 2 axes Cutting Machine Ø 230 mm) สามารถใช้ใบตัดขนาดสูงสุดถึง 230 มิลลิเมตร
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp

15 มกราคม 2567

ผู้ชม 2434 ผู้ชม

CUTLAM®micro 3.0

It's designed for laboratories looking for an automatic machine adapted to high precision, long and difficult cuts.

This benchtop designed cutting machine offers astonishing
capacities. Thanks to the multiple motion table, the cutting wheel, and the feed speed control system according to the
cutting torque, this machine will overcome any difficult task.

Large capacity compact cutting machine

It is fitted with a large: 320 x 540 mm chamber, and equipped with a grooved aluminium table, sized 210 x 210 mm, and stainless steel interchangeable pallets.

The large capacity of the CUTLAM®micro 3.0 relies on the use of 230 mm cut-off wheel, combined with a vertical movement range of 100 mm (Z axis) and a longitudinal range of 270 mm (Y axis).

Precision

The positioning of the axes, which can be seen on the screen is 0,01 mm accurate and feed speed while cutting can be set from 0,1 to 20 mm/sec or 0,1 to 10 mm/sec.

The use of the “smart motion” (read the following page about this device) will automatically reduce the moving of the axes in order to obtain a minimum value of 0,02 mm/sec.

User-friendly interface

A large touch-screen allows you to select the different functions using an easy to use, intuitive interface. All the positioning and cutting parameters can continuously be visible on the screen. The use of a joystick allows a fast positioning of the cut-off wheel; while in automatic and semi-automatic modes, an estimation of the remaining cutting time appears.

Three cutting modes are available: manual, semi-automatic and automatic.

Efficiency: 5 key points for higher productivity:

1. Powerful motor of 1,1 kW.
2. Sequential cutting mode for a maximum cooling.
3. Ingenious feed speed control:

  • The feed speed is pre-set, and will be automatically reduced if the load on the cutting wheel increases. The pre-set speed returns when the load on the wheel decreases.
  • It improves the quality of the cut by limiting the heat damages on the samples.
  • Suitable for irregular samples and/or materials with heterogeneous hardness.
  • It prevents the wheel from breaking in case of overload.
  • It allows you to always work at maximum speed without any risk of damage.

4. Optional cross-feed table (X axis) manual or motorised for repetitive parallel cuts.
5. Independent lubrication/cooling system, composed of a 100 µ washable filter, and a 30 litres sedimentation tank with multi-point nozzle, insures excellent cooling of the sample and the cutting wheel even during intensive use.

Technical data CUTLAM®micro 3.0

Wheel ∅ 75 to 230 mm
Shaft ∅ 12.7 mm
Standard flanges ∅ 75 mm
Pressure under the wheel 70 mm (with a ∅ 230 mm wheel)
Max cutting capacity ∅ 77 mm (with a ∅ 230 mm wheel)
Vertical movement Z axis 55 mm manual or 50 mm motorized (optional)
Lubrication/Lubrication Decantation tank, 2 chambers,
Input 100 µm filter, Pump 800 L/hour driven
by the machine.
Motor power 1.1 kW
Rotational sppeed Variable, from 1000 to 4000 rpm
Cutting modes Manual, semi-automatic, automatic
Feed speed control 0,1 to 20 mm/sec. programmable
Automatic control of speed / power continuous
or sequentia
Lightening LED
Protection Transparent cover with locking system
Touch screen 3.5" Intuitive and graphic interface
Voltage 230 V - 50 Hz single phase
Dimension (WxHxD) 620 x 470 x 750 mm (H cover open: 812 mm)
Weight 80 kg
Reference 60 CTM30 00

Technical characteristics and equipment

Theoretical cutting capacity

              

Options

Manual cross-feed table (X axis) to cut parallel sections stroke 55 mm accurate to 0,01 mm 60 CTM31 20
Motorised cross feed table (X axis) to cut parallel sections stroke 50 mm, accurate to 0,01 mm 60 CTM34 00
Positioning laser 60 CTM35 00

Downloads

 Technical sheet

 Metallography (EN)

Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท)​
อยู่ในระหว่างการอัพเดทข้อมูล...        
 
Engine by shopup.com