หมวดหมู่สินค้า: ATEX
Custom designed load PIN.
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp
04 มิถุนายน 2567
ผู้ชม 952 ผู้ชม
Custom dimensioning LOAD PIN manufactured under the client requirements, specially designed for replacing and upgrading the existing axles and provide reliability measurements of the loads applied on the same axis. Main features: easy to replace and install without any system modifications, robust construction in high strength stainless steel, IP68 working temperature from -20°C to +90°C , fast delivery terms
Technical specification
| Nominal capacities | to be specified | kg |
|---|---|---|
| Accuracy class | 0,5 | % |
| Minimum dead load | 0 | %Ln |
| Service load | 150 | %Ln |
| Safe load limit | 400 | %Ln |
| Total error | < ± 0.5 | %Sn |
| Repeatability error | < ± 0.2 | %Sn |
| Temperature effect on zero | < ± 0.02 | %Sn/5K |
| Temperature effect on sensitivity | < ± 0.02 | %Sn/5K |
| Creep error (30 minutes) | < ± 0.1 | %Sn/5K |
| Temperature compensation | -20 až +60 | ° C |
| Temperature limits | -20 až +90 | ° C |
| Nominal sensitivity (Sn) | 1 ± 0.25% | mV/V |
| Excitation volgage | 3 .. 15 | V |
| Input impedance | 400 ± 30 | Ohm |
| Output impedance | 352 ± 5 | Ohm |
| No load output | 2 | %Sn |
| Insulation resistance | > 5000 | MOhm |
