เวลาทำการ: จันทร์-ศุกร์ เวลา 08:30-17.30 น.

ติดต่อสอบถามโทร : +662-886-7834 - 5

ภาษา :

Line ID Sales : @Siamintercorp

เครื่องทดสอบการหดตัวของฟิล์ม (Film Shrinkage Tester) ยี่ห้อ Oakland รุ่น DS-2100
หมวดหมู่สินค้า: Film Shrinkage Tester
เครื่องทดสอบการหดตัวของฟิล์ม (Film Shrinkage Tester) ตามมาตรฐาน ASTM D 2732 และ ANSI ISO 11501 เป็นต้น

แท็ก:

12 กรกฎาคม 2562

ผู้ชม 162 ผู้ชม

Full-Featured Tester for Determining Percentage Dimensional Shrinkage

Based on the temperature-controlled, hot-plate design, the Model DS-2100 offers a safer alternative to conventional hot-oil bath systems, and a faster and more precise alternative to conventional ovens for shrink film analysis and testing.


With hot plate temperatures controlled to +/- 0.3 C, and temperature stability achieved in 15 minutes or less, the DS-2100 provides a useful quality tool for determining performance characteristics and Temperature vs. Shrinkage profile analysis of your shrink film products.

The Oakland Advantage
ASTM and ANSI Reference Standards

ASTM D2732-14 (Reference only) Unrestrained Linear Thermal
Shrinkage of Plastc Film and Sheeting (Constant-Temperature
Liquid Bath, 0.030 in. thickness or less)

ANSI ISO 11501-95 (Reference only) Determination of Dimensional
Change on Heating Plastic Film and Sheeting (Circulating-Air Oven,
1 mm thickness or less)

Advanced Technical Features in Each Model
Easy, Error-Free Operation
The DS-2100 has been designed to give accurate, repeatable results for the Quality Control analysis of:
Internal Stresses, locked in the film and released by this test. Percentage Shrinkage of "Shrink Film"
Offering Dimensional Shrinkage with Advanced Features Testing
Hot-plate temperature controlled to +/- 0.3 deg. C
Temperature stability achieved in 15 minutes
Count down LCD timer
Back-lit, scaled, cooling area
Direct read-out of percentage shrinkage
Industry-Leading Correlation Data
The DS-2100 provides a useful quality tool for determining
performance characteristics and Temperature vs. Shrinkage profile
analysis of your shrink film products. Factory preset operating
temperature range of 70 - 300 deg. F.
Specifications
Mode of operation: Off-line testing / lab use
Materials: All plastic film and plastic sheet materials
Measurement Range: 50 mm Round Sample Size
0 - 120 % Shrinkage Scale ranges available
Resolution: 1% Shrinkage
Accuracy: +/- 0.5% Shrinkage
Backlit, Sealed Cooling Area: 2.50 inch dia. (6.4 cm dia.)
Aluminium Hot Plate: With hinged protective grille
Heater Element: 250 Watts, 115V 60 Hz.
Temperature Controller: PID. Auto-tune. 0-400 deg. C 110-240V/50-60 Hz.
With discrete levels of access. 70 - 300 deg. F
factory preset operating temperature range
Display: LCD. Set point and Actual temperatures,
visual at the same time.
Sensor: 3-wire RTD BS1904 100 ohms at 0 deg Centigrade
DIN 43760-1980
Timer: Lapse timer with alarm. Registers overshoot
Cooling Area: Sealed for containing surplus oil
Switch: Back light for measuring disc
Measuring Disc: Scaled for direct measurement in percentage
Fan: Cooling. 115 V
Fuse: 250mA with spare in socket holder
Power Supply: 115 V 60 Hz or 240 V 50 Hz
Serial Data Communications: N/A
Power Requirements: 115 VAC, 60 Hz, 230 VAC, 50 Hz
or consult factory for special requirements
Dimensions (W x D x H, Instrument Only)
Dimensions (W x D x H, Shipping)
4 x 12 x 11 inch (100 x 305 x 260 mm)
16 x 16 x 16 inch (41 x 41 x 41 cm)
Weight (Instrument Only)
Weight (Shipping)
5 lb (2 kg)
8 lb (3.5kg)
(Due to continuous product improvement, all specifications are subject to change without notice.)

 Product Brochure.

ขอใบเสนอราคา
Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท)​
อยู่ในระหว่างอัพเดทข้อมูล...        
Engine by shopup.com