เวลาทำการ: จันทร์-ศุกร์ เวลา 09:00-17:30 น.

!!   รู้ลึก  รู้จริง เรื่องเครื่องมือทดสอบวัสดุ  !  ยืน 1 เรื่องมาตรฐานการให้บริการ   

ภาษา :

สนใจสินค้าและบริการ โปรดติดต่อ Line : @siamintercorp

เครื่องวัดค่าเวลาความเป็นเจลของอีพ็อกซี่เรซิ่น (Gelation time) 1 Channel Geltimer Type PST-1 (SIT25)
หมวดหมู่สินค้า: Epoxy Resin Tester (Gel Time)
เครื่องวัดค่าเวลาความเป็นเจลของอีพ็อกซี่เรซิ่น (Gelation Timer / Gel Timer) แบบ 1 หัววัด พร้อมจอแสดงผลเป็นแบบ LCD สำหรับวัดค่าเวลาความเป็นเจล (Gelation time) เมื่อเกิดปฏิกิริยาของ เรซิน ตามมาตรฐาน DIN 16945 Page 1, DIN 16919, DIN EN ISO 9396 และ DIN EN 14022 Method 5
*ราคาอาจมีการเปลี่ยนแปลงตามอัตราแลกเปลี่ยน โปรดสอบถาม Line : @siamintercorp

05 มกราคม 2567

ผู้ชม 2419 ผู้ชม

Description :

1 Channel Control Unit with Temperature Measurement, incl. software

The Gelnorm®– Geltimer PST-1 evaluates all factors which influence the gel time of reaction resins such as type and quantity of hardener, accelerator, inhibitor, filler, pigments, as well as temperature and moisture. The instrument is easy to operate and normally no maintenance necessary.

The principle of measurement of Gelnorm®– Geltimer is simple: A stamper made of aluminium or stainless steel performs an up-down cycle in a test tube filled with resin. When the point of gelation is reached, the test tube is pulled up by the stamper. This stops the clock which was started at the beginning of the experiment and the gel time can be read of. With the probe temperature system the exothermic reaction can be measured. The electrical heating device, option heating block GT, can be controlled directly with the internal temperature controller.

Technical Data :

Temperature control for the electrical heating block GT

Actual value (Pt100) Range: 0,0 °C ... 250,0 °C, adjustable and calibrated
Accuracy ± 0,3% of full scale ± 1 digit
Set value Range: 0,0 °C ... 200,0 °C (on request 250,0 °C)
Resolution 0,1 K
Load output power max. - resistive load : maximum 600 W
Temperature measurement for the sample
Sensor Thermocouple type K (Ni- CrNi) , EN 60 584
Connector Mini connector type K thermocouples, EN 60 584
Range 0,0 °C … 400,0 °C
Accuracy ± 1,5°C including cold-junction compensation
Time
Display LCD, 12mm
Start Button with status indicator
Stop optical switch
Range up to 99HH: 59MM: 59SS
Accuracy ± 1 second / 2 hours
ขอใบเสนอราคา
Reference Customer (กดที่โลโก้ เพื่อดูเว็บไซต์ของลูกค้าที่สั่งซื้อสินค้ากับทางบริษัท)​
อยู่ในระหว่างอัพเดทข้อมูล...        
Engine by shopup.com